Be Sure That Your Battery Is Safe Just By Keeping It Clean

Did you ever need to jump start your car only to notice that the battery was mired in crud? That kind of gunk that spreads over the battery is actually corrosion formed by acid condensation. Luckily, to clear out the acid build-up, you just need to utilize a basic chemical solution. Something as very basic as baking soda might easily clean the battery acid. Maintaining your battery isn't really very difficult to accomplish but you should take necessary precautions.

You have got to first obtain the supplies you need, most of which are in your home. The basic tools you need are a pair of safety glasses to cover your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Some open-end and box wrenches, a plastic or metal scraper, cleaning brushes for a battery terminal, and a turkey baster or perhaps a small funnel. It is also necessary to have a bucket of water,rubber gloves, spray-on household cleaner and some sponges or clean cloths. This might seem like a lot of things for cleaning a battery, but we did mention doing it safely.

A few of the corrosive deposits possess sulfuric acid, so it is a wise idea to use the safety glasses to protect your eyes, and the rubber gloves for your hands. You'll want to keep this substance away from your car, because it can eat away the paint. According to the amount of dirt and decay on the battery, the cleaning can vary, and some of the steps might blog not be necessary. If you'd like the battery to become very clean, you will have to remove the battery from the vehicle. First use the plastic or metal scraper to get off whatever dirt it is possible to, and also use the bristle brush.

Next step is to combine one tablespoon of baking soda with a pint of water and administer the solution to the battery and the cable connection using the funnel or turkey baster. Work the mixture of baking soda directly into the heavily corroded spots with the brush, and disconnect the battery cables from the terminals for easier cleaning. Make use of the pliers or assorted wrenches to loosen the connectivity before pulling them off, starting with the negative first, and then the positive. For your terminals and other parts, work with the brush again to remove the corrosion and do a flush using the baking soda solution.

So now use the liquid cleaner in the spray bottle, and a sponge to get rid of the remaining dirt and grease. Following that, dry all the parts with a clean cloth and reassemble everything plus be sure that the cable is connected positive first. Finally, after everything is secured and properly pulled together, you will now have a safe and clean battery.

Leave a Reply

Your email address will not be published. Required fields are marked *